1955-1957 Chevy Rear CPP Traction Bar Kit

CPP's Traction Bars are constructed from 1-inch 0.156-wall 4130, with 3/16-inch laser-cut, bent-steel mounts and self-lubricating plastic D-type bushings and 3/4-inch rod ends. The front mount features additional ground clearance and a forward-slanted approach angle; this makes it safer, if in the event it does hit something, the angled approach will act as a skid plate and help lift the car over the obstacle. The portion of the linkage that contacts the spring is a wider flat surface; this reduces the stress on the top of the leaf spring. The pivot positions are relocated to optimize weight transfer while reducing the spring load.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov