Your Classic Car Parts Headquarters
Features, Description, Reviews, Q&A
This installation kit is used to install the set screw to replace the plastic button inside the distributor. You will drill a hole in the housing using the tools and tap the hole for the set screw. The new screw will allow you to adjust play on cross gear to the main shaft.
Installation Instrucitons:
Distributor shaft must be removed before completing this modificaiton.
1. Insert the drill guide tool into the coupling threaded hole. Do so and tighten down snuggly with 7/8” wrench.
2. Insert 13/64 drill into guide until it bottoms out against the housing. Apply oil to bit and drill hole in the housing.
3. Remove drill guide and insert tap guide,
Fitment:
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov