BluePrint Engines ProSeries LS 376 C.I. 530 HP Base Dressed Fuel Injected Crate Engine

HP & Torque: 530 HP / 495 FT LBS
Compression Ratio: 10.7:1
Aluminum Heads
Hydraulic Roller Cam
Nodular Iron Crankshaft
Hypereutectic Pistons
BLOCK:
New GM Aluminum 6.2L block
OEM Block Machined in the USA!
6-Bolt Main
1-Piece Rear Main Seal
ROTATING ASSEMBLY:
Nodular Iron crankshaft
3.622" Stroke
6.098" connecting rods w/ 150,000 psi bolts
Hypereutectic Pistons
Internally Balanced
CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads -PS8015
72cc chamber
2.165" intake/1.600" exhaust valves
259cc intake/102cc exhaust runners
CAM SPECS:
Cam Type: Roller Cam
.612 Intake .585 Exhaust
225 Intake / 238 Exhaust duration
@ .050 - 113-degree lobe separation, 110 ICL
ALSO INCLUDES:
GM Musclecar Swap Oil Pan
DBW Throttle Body
Loaded Intake Manifold
Fuel Injectors and Rail
Coil Packs
Spark Plugs and Wires
Water pump
Harmonic Balancer
NOTES:
Engine is not shipped with Engine controller kit. Must purchase separately for your application. Controller kit can be found by part number BPPLS530
BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov