HP and torque: 350 HP / 350 FT LBS
Compression Ratio: 9.4:1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Hypereutectic Pistons
BLOCK:
NEW BluePrint Cast Iron Block
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
New BluePrint Forged crankshaft
3.250" Stroke
Forged 5.700" connecting rods w/ 150,000 psi bolts
Hypereutectic pistons
Internal Front/ External Rear
CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners
CAM SPECS:
Cam Type: Roller
.495 Intake .502 Exhaust
220 Intake / 224 Exhaust duration
@ .050, 114 ° lobe separation angle
IGNITION TIMING:
32 - 34 Degrees Total at 3500 RPM
ALSO INCLUDES:
670 CFM carburetor
Premium Vintage Valve covers
Premium Vintage Air Cleaner
6.75-inch Harmonic balancer
Spark plugs
Under Header Spark plug wires (Perfect for Rams Horn exhaust manifolds)
Fuel Pump and feed line
Oil pan
Timing cover
Aluminum Intake Manifold
Small cap Ready to run distributor equipped with Tach Drive and coil
Thermostat and thermostat housing
NOTES:
Not for use in pollution-controlled vehicles.
BluePrint Engines BP327CTCV
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov