HP & Torque: 341 HP / 371 FT LBS
Compression Ratio: 9:1
Aluminum Heads
Hydraulic Roller Cam
Steel Crankshaft
Hypereutectic Pistons
BLOCK:
NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
Steel Crankshaft
3.480" Stroke
Forged 5.700" connecting rods
Hypereutectic pistons
Internal Front/ External Rear engine balance
CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners
CAM SPECS:
Cam Type: Roller
.477 Intake .471 Exhaust
202 Intake / 212 Exhaust duration
@ .050 - 115-degree lobe separation
IGNITION TIMING:
32 Degrees Total at 3500 RPM
ALSO INCLUDES:
Valve covers
Oil pan
Timing cover
Aluminum intake
HEI distributor
Spark plugs and wires
600 cfm carburetor
Mechanical fuel pump
Water neck
Thermostat and thermostat housing
Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and
Power Steering Pump (Does not fit Corvette)
NOTES:
This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
BluePrint Engines BP350CTCK
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov