There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your GM vehicle needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP036 for the street performance crowd who want to use their cars in a variety of application. These springs feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspensions SP036 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.
The SP036 linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!
Features
Progressive Rate Spring: No
Spring Position: Rear
Spring Type: Coil
Lowers the front of your 1978-1987 GM G-body 1.5-inch
Lowers the front of your 1982-1992 GM F-body 1.25-inch
Improves handling and ride quality
Manufactured from chrome silicon high-tensile spring wire
Cold wound on a CNC Coiling Machine to exact specifications
Lifetime warranty against spring sag
Stress-relieved at 750 degrees F
Shot-peened
Computer tested for accurate height and spring rate
Made in the U.S.A.
Fitment:
- 1982 Pontiac Firebird
- 1983 Pontiac Firebird
- 1984 Pontiac Firebird
- 1985 Pontiac Firebird
- 1986 Pontiac Firebird
- 1987 Pontiac Firebird
- 1988 Pontiac Firebird
- 1989 Pontiac Firebird
- 1990 Pontiac Firebird
- 1991 Pontiac Firebird
- 1992 Pontiac Firebird
CA Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov