BMR Non-Adjustable Front Lower Control A-Arms; Delrin; Standard Ball Joint; Front Bump Stops; Black Hammertone (67-69 Firebird)Find parts that fit my vehicle

***NOTE: This product is designed for cars with the bump stops installed on the front side of the lower A-arm. See additional information below.***

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.625-inch, 0.120-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMR’s AAL311 Lower A-arms are fitted with heavy-duty ball joints and greaseable, Delrin bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.

BMR’s AAL311 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The Delrin bushings add strength and reduce deflection over the stock rubber bushing. Designed for street performance, drag race, and handling, and pro-touring applications, BMR lower A-arms are engineered to provide 2 additional degrees of positive caster for increased high-speed stability. Combine with BMR Upper A-arms, and you get 4 additional degrees of positive caster (2 degree from the uppers and 2 degrees from the lowers), providing up to 6 degrees of total positive caster over stock. This gives you improved geometry and increased lateral grip during cornering situations.

BMR Suspension AAL311 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.

Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.

Fitment:

• 1967 Pontiac Firebird
• 1968 Pontiac Firebird
• 1969 Pontiac Firebird

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov