This is a complete kit that starts with a rear steer center take off style rack & pinion made to match the stock suspension of these Corvettes. The rack is mounted to a one piece bracket that mounts to the stock motor mounts. The kit does clear the z-bar and 4 speed linkage. This kit works on Small Block motor cars with stock manifolds or Shorty headers. Other headers may work with modification.
This kit is complete, everything that you need is included. The shaft kits use three u-joints and a support bearing. This connects up with a new Ididit retrofit column. You must use the column to use this kit! Floor Bracket and Gasket are included. We also include the hub adaptor and flasher kit. UniSteer's most detailed kit!
Tech Info:
Pinion Type/Size: 9/16"-26 Spline
Amount of Travel: 6"
Turns Lock to Lock: 3 Turns
Inner End Threads: 14mm x 1.5
Outer ends: 8020940
Kit Includes:
Rack and Pinion
Mounting Bracket
Mounting Hardware
Ididit Column - paintable
Steering Shaft Kit
Fitment:
- 1958 Chevrolet Corvette
- 1959 Chevrolet Corvette
- 1960 Chevrolet Corvette
- 1961 Chevrolet Corvette
- 1962 Chevrolet Corvette
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov