Power Rack and Pinion (68-69 Big Block V8 Torino)

This is a center take off rear steer rack and pinion with a ball center bar that is the exact same size as the original center link. The one piece mounting bracket bolts to the same factory holes that help the steering box and idler arm, and orients the rack, placing the ball center bat in the same plane as the original center link.

On big block cars we have used and recommend Hooker Long Tube Headers, their part #6113HKR. Other headers may work, but might require modifications, or a three u-joint setup.



Tech Info:

Pinion Type/Size: 17mm DD

Amount of Travel: 6"

Turns Lock to Lock: 2.5 - 2.75 Turns

Pressure Port Size: 18mm - 6AN Banjo (Lower)

Return Port Size: 16mm - 6AN Banjo (Upper)

Pump Required: Low Flow / Pressure

Inner End Threads: 9/16" - 18

Outer ends: 8021320

Kit Includes:

Rack and Pinion

Mounting Bracket

Mounting Hardware

Outer Tie Rod Ends

Pump and Line Kit

Steering Shaft Kit

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov