This new bolt-in rack and pinion cradle is available for both power and manual steering systems. This unique new style of steering system utilizes the original inner and outer tie rod ends. This makes for simple installation and maintains the original pivot position. No cutting, welding or drilling to the chassis–it bolts into the existing steering box holes. Easily converts this steering box application to rack and pinion steering without any modification.
All NEW Power Rack and Pinion with Lifetime Serviceability
Billet-Joint® and Column Adapter included
Stronger Rack Gear - 1 inch diameter
More than 6 inches of travel and Full Turning Radius
Bolts into Existing Chassis with no Suspension Modification
Fluid and Pressure Tested and Certified
Power Rack and Pinion Kit Includes:
Tilt Key Column
Mounting Hardware
Wiring Connector
Universal Joints
Patented Rack and Pinion Cradle System
Aluminum Mounting Reservoir (Hoses sold separately)
Power Steering Pump and Pulley
Billet Swivel Floor Mount
Note: This kit is designed to re-use the factory inner tie rod ends and does not include new inner tie rod ends.
Flaming River FR316KTPWPL
CA Residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov