1. Plug the Anderson connector of the 600W power supply to the fast charging port of ElecHive.
2. Plug the AC connector of the 600W power supply to the wall outlet.
3. To charge the ElecHive from empty to 90%, it needs around 4 hours. If you set the Charge/Discharge mode to 90%, the charging will stop there.
4. If you set Charge/Discharge mode to 100%, the left 10% may need another half to one hour as the charging power decreases in the final stage. The charging will stop automatically when it reaches 100%.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov